amazedshop
US  CA  EU  UK  SE

filter: +length +carbide +overall +drill +kennedy +diameter +electronic +grade +hardware +insert +sherwood +black
tags: black carbide diameter drill electronic grade hardware insert kennedy length overall sherwood
$11731.50
lalique crystal wild horses
Two wild horses rear up, whirling around, enjoying their freedom. The Earth trembles, flying out from beneath their hooves and their manes are gracefully sculptured by the wind. 13.26 inches in height. Length: 10.8 inches. Width: 6.88 inches. Weight: 19.16 lbs.H:337mm L:175mm W:275mm. details
$50.00
dock edge docks
Finish:Galvanized Stationary Dock Side Leg Holder Kit (6-Piece) Use for all dock applications Accommodates up to 1-7/8-in pipe Hardware is 1/8-in (3.175mm) nominal hot dipped galvanized steel with 7/16-in holes Requires (8) 2-1/2-in x 3/8-in (63.5mm x 9.525mm) carriage bolts, lock washer and nuts (not included) Includes: (2) Heavy duty side leg holders
- 5-in x 5-in x 1/8-in (127mm x 127mm x 3.175mm) (4) Backer plates
- 5-in x 5-in x 1/8-in (127mm x 127mm x 3.175mm). details
$79.00
dock edge docks
Finish:Galvanized Stationary Dock Inside Corner Kit (8-Piece) Use for all stationary dock applications 1/8-in (3.175mm) Nominal hot dipped galvanized steel with 7/16-in holes Requires (32) 2-1/2-in x 3/8-in (63.5mm x 9.525mm) carriage bolts, lock washer and nuts (not included) Includes: (4) Heavy duty inside connectors
- 5-in x 5-in x 1/8-in (127mm x 127mm x 3.175mm) (4) Backer plates
- 5-in x 5-in x 1/8-in (127mm x 127mm x 3.175mm). details
$19.99
kennedy piston ring compressor
. details
$15.09
kennedy piston ring compressor
. details
$21.99
mitutoyo 167-107 175mm measuring
Series 167
- MetricFor zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3µm. Parallelism: within 2µm. Metric. Size: 175mm; Diameter: 7.9mm; System of Measurement: Metric; Additional Features: Includes Heat Shielding to Prevent Changes in Length While Held in the Hand; Parallelism: 2µm; Accuracy: +/-4.5mm; Flatness: 0.3; Product Number: 167-107. details
$91.00
kennedy 150mm engineers
Manufactured from the highest quality castings with precision cut screw mechanisms and precision machined jaws. Suitable for workshop, automotive and engineering use. Overall Material: Cast Iron; Overall Width: 175mm; Special Features: Precision Vice; Jaw Opening: 190mm; Jaw Dimensions: 150mm x 12.5mm x 21mmmm; Base Type: Fixed; Overall Length: 480mm; Compatible Vice Jaw Width: 150mm; Jaw Thickness: 12.5mm; Overall Height: 175mm; Throat Depth: 85mm; Mounting Type: Bolt; Jaw Width: 150mm; Overall Dimensions: 480mm x 175mm x 185mmmm; Jaw Material: Cast Iron; Vice Type : Engineer's Vice; Jaw Height: 21mm. details
$10.19
xtegra tspt175r 175mm knurled tail
TSPT175R 175mm knurled tail ties with sequential numbering for efficient security of parcels, packages and baggaged items. Pack 100 ties. details
$71.00
dock edge docks
Finish:Galvanized Stationary Dock Connector Kit (6-Piece) Use for all stationary dock and ramp connections 1/8-in Nominal hot dipped galvanized steel with 7/16 holes Requires (16) 2-1/2-in x 3/8-in (63.5mm x 9.525mm) carriage bolts, lock washer and nuts (not included) Includes: (2) Heavy duty connectors
- 5-in x 5-in x 1/8-in (127mm x 127mm x 3.175mm) (4) Backer plates
- 5-in x 5-in x 1/8-in (127mm x 127mm x 3.175mm). details
$13.00
oxford 175mm micrometer setting
Metric SizesFor setting external micrometers, calipers etc. to zero, providing accurate repeatability of measurements. Flat, lapped measuring ends with fitted heat insulation block. Manufactured to BS 870. Size: 175mm; Standards Met: BS 870; Diameter: nullmm; Weight Each: 62g; System of Measurement: Metric; Additional Features: fitted heat insulation block; Parallelism: nullµm; Accuracy: 0.004mm; Flatness: null; Product Number: null. details
$32.39
sykes-pickavant 660373 piston ring
For holding piston rings in place once removed from the cylinder. Made from tempered spring steel with spring assisted ratchet type lock. Supplied complete with square drive key. Product Number: 66037300; Product Type: Piston Ring Compressor; Overall Length: 80mm; Weight Each: 0.35kg; Opening Capacity: 90 to 175mm; Additional Features: Ratchet type lock; Overall Width: 175mm; Throat Depth: 80mm. details
$42.99
kennedy valve spring compressor 5
Fully adjustable valve spring compressor for use on multi-valve petrol and diesel engines with deep seated valves. Universal model with unique dual-cam action, parallel lift and automatic locking reversible jaw adaptor, suitable for general use on a wide range of OHC, OHV and CVH engines. A unique direct action compressor lever gives improved visibility and ease of use in areas of difficult access. Manufactured from heavy-duty steel with all riveted joints and a slip resistant rubber handles. Restricted access adaptors: 25mm, 30mm. Jaw opening: min 55mm, max 175mm. Throat clearance: 165mm. Packaging dimensions (W x H x D): 430 x 205 x 40mm. Product Number [...]. details
$47.02
knipex 97 40 20
COMPRESSION TOOL 175MM
- 97 40 20 SB. details
$20.99
kennedy 10mm mag plain heavy duty
All main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets. Heavy Duty Fitment
- PlainFitted as standard to E905 2 Mag Universal Stand and E908 4 Mag Universal Stand. Column: 12 x 175mm. Cross bar: 10 x 165mm. Threaded: M8 x 1.25mm. Thread Size: M8 x 1.25mm; Type: Heavy Duty Fitments; Size: Column: 12 x 175mm; To Suit: 1/4 I/D Lug, Stem Spigot Dia. details
$28.00
kennedy 10mm mag fine adjusting
All main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets. Heavy Duty Fitment
- Fine AdjustingFitted as standard to KEN 333-2060K and KEN 333-2050K. Column: 12 x 175mm. Cross bar: 10 x 150mm with fine adjustment. Threaded: M8 x 1.25mm. Thread Size: M8 x 1.25mm; Type: Heavy Duty Fitments; Size: Column: 12 x 175mm; To Suit: 1/4 I/D Lug, Stem Spigot Dia.1/8 , 1/4 , 5/16 and 3/8 ; Product Number: RP991BLKEN. details
$25.74
bernstein werkzeugfabrik
SIDE CUTTER 4MM CUT CAPACITY 175MM
- 3-135-16. details
$85.00
oxford 150-175mm external
. details
$35.99
kennedy powerstrip semi automatic
Self adjusting. Wire is gripped and stripped in a single action. Also features a wire cutter to allow for trimming. Adjustable slide and lock wire stop for fast accurate setting of strip length. Overall length: 175mm. Overall Length: 175mm; Type: Wire Stripper; Compatible Wire Type: Electricity Cable; Wire Gauge Capacity Range: 1.25
- 6mm²; Tool Features: Adjustable Slide and Lock Wire Stop; Minimum Wire Gauge Capacity: 1.25mm²; Maximum Wire Gauge Capacity: 6mm²; Handle Material: Plastic; Blade Material: Hardened Steel. details
$119.00
pro power
HEAT SHRINK TUBING 3.175MM ID FEP TRANS 2FT PK50
- SST-008-2050-CLR. details
$75.88
thomas amp betts
HEAT SHRINK TUBING 3.175MM ID PO BLACK 100FT
- CPO125-0-C. details
$39.48
pro power
HEAT SHRINK TUBING 3.175MM ID PO BLACK 100FT (30.5M)
- FPS-008-1100-BLK. details
$38.54
pro power
HEAT SHRINK TUBING 3.175MM ID PO BLACK PK OF 25 4FT/1.22M PIECES
- FPF-008-4025-BLK. details
$37.16
pro power
HEAT SHRINK TUBING 3.175MM ID PVC BLACK 100FT
- PVS-008-1100-BLK. details
$36.68
pro power
HEAT SHRINK TUBING 3.175MM ID PO BLACK PK OF 25 4FT (1.2M) PCS
- FPS-008-4025-BLK. details
$34.36
3m
HEAT SHRINK TUBING 3.175MM ID PO TRANS 100FT
- FP-301-1/8-CLEAR. details
$49.44
pro power
HEAT SHRINK TUBING 3.175MM ID PTFE PACK OF 25 6IN PIECES
- 3495. details
$31.66
3m
HEAT SHRINK TUBING 3.175MM ID PO BLACK 100FT
- 00051135355626. details
$15.80
pro power
HEAT SHRINK TUBING 3.175MM ID PVDF TRANS PK OF 20 6IN PCS
- KYS-008-6020-CLR. details
$760.00
norbar 43255 trucheck torque
The Trucheck is for click type torque wrenches and comes with a single measurement unit (Nm or lbf.ft). Only one button on the device to zero the display
- simplicity itself! TruCheck has an accuracy of ±1% of reading over it's operating range. Comprehensive range of 8 models available. Drive Size: 43253
- 1/4 male hexagon(vertical).43254
- 1/4 male hexagon (vertical).43255
- 1/4 male hexagon (horizontal)
- supplied with 1/4 and 3/8 female square drive adaptors. Torque Measurement Range: 1
- 25 Nm; Drive Type: Hexagon (Horazontal; Dimensions: 72 x 64 x 175mm; Weight Each: 2.6kg; Overall Depth: 72mm; Drive Sockets Adaptors Included: 1/4 in Female Square [...]. details