amazedshop
US  CA  EU  UK  SE

filter: +guitar +bass +rear +front +pickup +leonard +alternative +bridge +tone +black +electric
tags: alternative bass black bridge electric front guitar leonard pickup rear tone
$69.99
dimarzio dp116 hs-2 guitar pickup
Perfect for use in neck or middle position for guitars with a humbucker in the bridge, or in any position in a classic Strat* configuration. Works well through high-gain racks and preamps. Eric Johnson found that wiring an HS-2 for single coil operation produces an incredible vintage tone. Mixes well with HS-3, or YJM pickups. Also works in H-S-H combinations with the PAF Pro, FRED, Air Classic, or the Humbucker from Hell (See recommended accessories box on this page).*Strat is a registered trademark of Fender. Great for neck or middle position use in combination with a humbuckerFor use in any position in Strat* configurationsWiring: Standard 4-conducto [...]. details
$69.99
dimarzio dp116 hs-2 guitar pickup
Perfect for use in neck or middle position for guitars with a humbucker in the bridge, or in any position in a classic Strat* configuration. Works well through high-gain racks and preamps. Eric Johnson found that wiring an HS-2 for single coil operation produces an incredible vintage tone. Mixes well with HS-3, or YJM pickups. Also works in H-S-H combinations with the PAF Pro, FRED, Air Classic, or the Humbucker from Hell (See recommended accessories box on this page).*Strat is a registered trademark of Fender. Great for neck or middle position use in combination with a humbuckerFor use in any position in Strat* configurationsWiring: Standard 4-conducto [...]. details
$69.99
dimarzio dp116 hs-2 guitar pickup
Perfect for use in neck or middle position for guitars with a humbucker in the bridge, or in any position in a classic Strat* configuration. Works well through high-gain racks and preamps. Eric Johnson found that wiring an HS-2 for single coil operation produces an incredible vintage tone. Mixes well with HS-3, or YJM pickups. Also works in H-S-H combinations with the PAF Pro, FRED, Air Classic, or the Humbucker from Hell (See recommended accessories box on this page).*Strat is a registered trademark of Fender. Great for neck or middle position use in combination with a humbuckerFor use in any position in Strat* configurationsWiring: Standard 4-conducto [...]. details
$249.00
fenderrear
When the bodywork becomes damaged it is tempting to save money and fit none-standard pattern parts, that in fairness with a little pushing and twisting will eventually line up, and providing you have not damaged or scratched the finish, may or may not look O.K! Or you could order this finished, beautifully made CMS none OE Fender that slots into position and will make your machine look like it just rolled out o. details
$213.00
fender rr nh24 non oe
When the bodywork becomes damaged it is tempting to save money and fit none-standard pattern parts, that in fairness with a little pushing and twisting will eventually line up, and providing you have not damaged or scratched the finish, may or may not look O.K! Or you could order this finished, beautifully made CMS none OE Fender that slots into position and will make your machine look like it just rolled out o. details
$249.00
80100-129-670ea
When the bodywork becomes damaged it is tempting to save money and fit none-standard pattern parts, that in fairness with a little pushing and twisting will eventually line up, and providing you have not damaged or scratched the finish, may or may not look O.K! Or you could order this finished, beautifully made CMS none OE Fender that slots into position and will make your machine look like it just rolled out o. details
$180.50
fender rr r2 non oe
Top quality, none OE bodywork parts like this Rear Fender may cost a little more, but are in the finished colour, they will line up and slot into the correct position without pushing, pulling and grunting! When fitted they will help the machine look like it has just rolled off the factory production line
- could cheap pattern copies do all this and help your machine retain its highest possible value
- we don't think so, and . details
$180.50
fender rr g27 non oe
Top quality, none OE bodywork parts like this Rear Fender may cost a little more, but are in the finished colour, they will line up and slot into the correct position without pushing, pulling and grunting! When fitted they will help the machine look like it has just rolled off the factory production line
- could cheap pattern copies do all this and help your machine retain its highest possible value
- we don't think so, and . details
$70.00
fender front
Top quality OE bodywork parts like this Fender Mudguard may cost a little more, but are ready to paint, they will line up and slot into the correct position without pushing, pulling and grunting! When fitted they will help the machine look like it has just rolled off the factory production line
- could cheap pattern copies do all this and help your machine retain its highest possible value
- . details
$70.00
30x2151100 fender
Top quality OE bodywork parts like this Fender Mudguard may cost a little more, but are ready to paint, they will line up and slot into the correct position without pushing, pulling and grunting! When fitted they will help the machine look like it has just rolled off the factory production line
- could cheap pattern copies do all this and help your machine retain its highest possible value
- . details
$70.00
30x2151100 fender front
Top quality OE bodywork parts like this Fender Mudguard may cost a little more, but are ready to paint, they will line up and slot into the correct position without pushing, pulling and grunting! When fitted they will help the machine look like it has just rolled off the factory production line
- could cheap pattern copies do all this and help your machine retain its highest possible value
- . details
$11.99
bass pro shops fender adjuster kit
Position your boat fenders exactly where they re needed the most with the Bass Pro Shops Fender Adjuster Kit withine. details
$180.50
fender rear non oe
Top quality, none OE bodywork parts like this Rear Fender may cost a little more, but are in the finished colour, they will line up and slot into the correct position without pushing, pulling and grunting! When fitted they will help the machine look like it has just rolled off the factory production line
- could cheap pattern copies do all this and help your machine retain its highest possible value
- we don't think so, and . details
$1399.99
gampl kiloton electric bass
What happens when you pack Leo Fender's potent Magnetic Field Design bass humbucker into the sleek shape of his SB-2? The new G&L Kiloton: explosive power that's easy to handle. Kiloton's silhouette is the most comfortable bass body ever created by Leo. It's compact and pure, with every curve and contour perfectly executed. And now it's carrying more firepower than ever, with Leo's G&L Magnetic Field Design humbucker placed right in the sweet spot he specified back when the sign over our door still read CLF Research. Kiloton's single MFD bucker fires without the aid of a preamp, while a 3-position series split parallel toggle harnesses the coils power. [...]. details
$140.00
fender fr nh24 non oe
When the bodywork becomes damaged it is tempting to save money and fit none-standard pattern parts, that in fairness with a little pushing and twisting will line up and may or may not look O.K! Or you could order finished, ready to paint, beautifully made CMS none OE bodywork that slots into position and will make your machine look like it just rolled out of the showroom! Alternatives: #6. details
$399.99
squier classic vibe left-handed
The Classic Vibe Stratocaster 50s provides unmistakable 50s-era Fender vibe and tone. The alder body has a Two-color Sunburst finish; the vintage-tint gloss-maple neck has a maple fingerboard with 21 medium-jumbo frets and a modern 9.5 radius. That long-familiar tone comes from a custom set of alnico III single-coil pickups-clear and bright, with terrific sustain even in crunch mode. Custom staggered polepieces provide improved string-to-string balance. Body: AlderBody Shape: StratocasterNeck Shape: Modern C ShapeNumber of Frets: 21Fret Size: Medium JumboPosition Inlays: Black Dot Position InlaysFretboard Radius: 9.5 (24.1 cm)Fretboard: MapleNeck Materi [...]. details
$83.00
bartolini original bass series
The 59J-LN1 is the Fender Jazz Bass (J Bass) replacement long neck pickup for the neck position. NOTE: For J Bass instruments where both the neck and bridge pickup lengths are equal, the long neck is especially designed for the neck position. It is highly respected by musicians and luthiers alike for its deep tone, strong lows, low mids tone. They feature a split coil design. This is an original series bass pickup with a passive design. It is cast in epoxy to remove unwanted feedback and microphonics. The lengths of the neck and bridge pickups in the original J-basses are not equal. The neck pickup is 3-5/8 long, which is slightly shorter than the bridge [...]. details
$167.50
fender
The CBR900RR led the way by upping the anti in the hyper Sports Bikes stakes and despite strong opposition from the other big three Japanese manufacturers the Blade still is the machine to beat! If you require a new fender for your machine and this is not the type colour code you are looking for. details
$167.50
fender
The CBR900RR led the way by upping the anti in the hyper Sports Bikes stakes and despite strong opposition from the other big three Japanese manufacturers the Blade still is the machine to beat! If you require a new fender for your machine and this is not the type colour code you are looking for. details
$167.50
fender
When first introduced this model led the way by upping the anti in the hyper Sports Bikes stakes and despite strong opposition from the other big three the Blade is still the machine to beat! If you require a new fender for your machine and this is not the type colour code you are looking for check out: #61100MFL000ZB. details
$167.50
fender
The CBR900RR led the way by upping the anti in the hyper Sports Bikes stakes when first introduced, and, despite strong opposition from the other three Japanese manufacturers, the Blade still is the machine to beat! If you require a new fender for your machine and this is not the type colour code you are l. details
$95.00
seymour duncan five-two fender
Sand-cast Alnico V magnets on the 3 low strings add more definition and punch to the bottom end. Sand-cast Alnico II magnets on the 3 high strings provide a warm and smooth top end without sacrificing that great Tele quack. Tele players often complain that their low strings sound mushy and their high strings are too bright
- especially in the bridge position. The Five-Two concept counteracts this phenomenon. If you look closely at the pickup, you can actually see the difference between the 2 magnet types. Designed for the bridge position. Alnico II and V rod magnets6.7k D.C. resistance8.2kHz resonant peakSingle-conductor, cloth-wrapped cableModerate out [...]. details
$95.00
seymour duncan five-two fender
Sand-cast Alnico V magnets on the 3 low strings add more definition and punch to the bottom end. Sand-cast Alnico II magnets on the 3 high strings provide a warm and smooth top end without sacrificing that great Tele quack. Tele players often complain that their low strings sound mushy and their high strings are too bright
- especially in the bridge position. The Five-Two concept counteracts this phenomenon. If you look closely at the pickup, you can actually see the difference between the 2 magnet types. Designed for the bridge position. Alnico II and V rod magnets6.7k D.C. resistance8.2kHz resonant peakSingle-conductor, cloth-wrapped cableModerate out [...]. details
$83.00
bartolini original bass series
The 59J-L1 is the Fender Jazz Bass (J Bass) replacement long pickup for the bridge position. It is highly respected by musicians and luthiers alike for its deep tone, strong lows, low mids tone. They feature a split-coil design. This is an original series bass pickup with a passive design. It is cast in epoxy to remove unwanted feedback and microphonics. The lengths of the neck and bridge pickups in the original J-basses are not equal. The neck pickup is 3-5/8 long which is slightly shorter than the bridge pickup which is 3-3/4 long. Some modern designs, however, use two long bridge-length pickups. In this configuration it is important to use the LN (lon [...]. details
$78.00
bartolini original bass series
The 9J-L1 is the Fender Jazz Bass (J Bass) replacement long pickup for the bridge position. It is highly respected by musicians and luthiers alike for its deep tone, strong lows, low mids tone. They feature a split coil design. This is an original series bass pickup with a passive design. It is cast in epoxy to remove unwanted feedback and microphonics. The lengths of the neck and bridge pickups in the original J-basses are not equal. The neck pickup is 3-5/8 long which is slightly shorter than the bridge pickup which is 3-3/4 long. Some modern designs, however, use two long bridge-length pickups. In this configuration it is important to use the LN (long [...]. details
$399.99
squier vintage modified telecaster
For the first time ever, Squier introduces a Vintage Modified Telecaster Custom guitar with Fender-designed Wide Range humbucking pickup in the neck position for incredibly full tone. The Wide Range humbucking pickup is an acclaimed and time-honored Fender innovation, complemented here by a sharp, clear Duncan Designed TE-101B single-coil bridge pickup. Players have done it for years. Whether installing hotter pickups, different pickguards or just plain personalizing their instruments with distinctive paint jobs, modified means adding new twists to familiar designs. Squier's Vintage Modified series excels at just that, imparting hot-output chop-shop sou [...]. details
$399.99
squier vintage modified telecaster
For the first time ever, Squier introduces a Vintage Modified Telecaster Custom guitar with Fender-designed Wide Range humbucking pickup in the neck position for incredibly full tone. The Wide Range humbucking pickup is an acclaimed and time-honored Fender innovation, complemented here by a sharp, clear Duncan Designed TE-101B single-coil bridge pickup. Players have done it for years. Whether installing hotter pickups, different pickguards or just plain personalizing their instruments with distinctive paint jobs, modified means adding new twists to familiar designs. Squier's Vintage Modified series excels at just that, imparting hot-output chop-shop sou [...]. details
$70.00
bartolini classic bass series
The 59CBJS-L1 is the Fender Jazz Bass (J Bass) replacement long pickup for the bridge position. It is highly respected by musicians and luthiers alike for its deep tone, strong lows, low mids tone. They feature a low noise single coil design. The Classic Bass Series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more air and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics. The lengths of the neck and bridge pickups in the original J-basses are not equal. The neck pickup is 3-5/8 long, which is slightly shorter than the [...]. details
$76.00
bartolini classic bass series
The 9CBJD-L3 is the Fender Jazz Bass (J Bass) replacement long pickup for the bridge position. It is highly respected by musicians and luthiers alike for its bright tone, enhanced treble tone. They feature a dual in-line humcanceling coil design. The Classic Bass Series bass pickups are passive designs featuring an extended and more resonant frequency range. They have far more air and definition at the top without sacrificing lows and low mids. They are cast in epoxy to remove unwanted feedback and microphonics. The lengths of the neck and bridge pickups in the original J-basses are not equal. The neck pickup is 3-5/8 long, which is slightly shorter than [...]. details